ya me baje los archivos... lo que despues de empezar a leer, tal cual com odicen no es nada facil... bah para mi que trabajar con la consola me cuesta horrible...
esto esta en: http://www.dd-wrt.com/wiki/index.php/How_To_Flash_the_WRT54Gv8
How To Flash the WRT54G v8 Using RC5
Configure your computers local lan ethernet address to 192.168.1.100, subnet 255.255.255.0, gateway 192.168.1.1 . Then connect an Ethernet cable to your computer and port 1 of your WRT54Gv8 router (Do Not Use Wireless).
Unplug the power cord from the WRT54Gv8.
Push the reset button while plugging in the power cord and hold the button for about 20 seconds.
Open your browser and enter into the address bar http://192.168.1.1
Use the firmware upgrade dialog to flash vxworkskillerGv8-v3.bin.
If you see a dialog asking you to reboot the router, power cycle the router by unplugging the power cord and plugging it in again. I strike this step out, because killer-v3 already reboots the router on its own --Soulstace 15:34, 9 May 2008 (CEST)
Wait for about 1 - 2 minutes.
You will not be able to browse the WRT54 at this point, but you should be able to ping 192.168.1.1.
// hasta aca todo bien...
Now it's time to flash the DD-WRT firmware using TFTP
If you're on Windows, enter tftp -i 192.168.1.1 put dd-wrt.v24_micro_generic.bin at your cmd shell
/*
aca me tranque... ta abri la consola, y escribi como dice tftp -i 192.168.1.1, lo que no entiendo es en que carpeta hay que poner dd-wrt.v24_micro_generic.bin, y el resto de los parametros que menciona
tftp [-i] host [get | put] origen [destino] que deberia de poner en cada uno??
*/
If you're on Linux, enter tftp -m octet 192.168.1.1 -c put dd-wrt.v24_micro_generic.bin at your shell
If you're on Linux, and you get the "error code 3" while trying to flash it, try atftp. This solved the problem when using ArchLinux to flash. The appropriate code is on the line below.
In Ubuntu Linux I entered atftp --option "mode octet" --verbose -p -l dd-wrt.v24_micro_generic.bin192.168.1.1
If you're on OSX, enter tftp -e 192.168.1.1. At the tftp> prompt enter put dd-wrt.v24_micro_generic.bin at your shell
The file will now be transfered and flashed to your router. After this is done, dd-wrt will automatically boot. After about a minute, you can browse dd-wrt on your router at http://192.168.1.1.
If you are having problems with port 4 not working on your router, an upgrade to RC5 will fix that problem.
les agradeceria me ayudaran un poco mas.... si no es mucha molestia...
desde ya muchisimas gracias! y disculpen la joda...
salu2 inu
-"Hubo una vez dos hombres que tomaron el mismo camino por 10 años, pero encontraron verdades totalmente distintas. Asi que yo pienso que si vago por 10 años encontrate mi propia verdad"- Seta Sojiro (Rurouni Kenshin)
)
